Answer
Oct 13, 2021 - 01:21 PM
Sorry we do not. The pullers are designed to meet marine engineer specs. This pullers plate should be 1.25" maximum, the same thickness as the smallest shafts diameter. Marine specs recommend at least the diameter of the shaft between the prop face and strut.
If your space is less than 1.25" the best recommendation I have is to grind/machine the plate to your specs. Please be aware, modifications will void any warranties, so the puller won't be returnable if it fails or doesn't function correctly.
Another option is to loosen the transmission coupling and slide the entire shaft aft until the puller fits. Pull the prop, then re-tighten the coupling.
If your space is less than 1.25" the best recommendation I have is to grind/machine the plate to your specs. Please be aware, modifications will void any warranties, so the puller won't be returnable if it fails or doesn't function correctly.
Another option is to loosen the transmission coupling and slide the entire shaft aft until the puller fits. Pull the prop, then re-tighten the coupling.
